Faucet Costs In Atlanta: How Much Should You Expect to Spend?

Ever considered the costs of faucet installation, particularly in your bathroom?

Wondering how kitchen faucet prices might compare?

You're in the right place!

This article is a one-stop-shop for understanding everything about bathroom and kitchen faucets, from the average faucet installation cost to the cost of faucet replacement in the Atlanta region.

You'll leave with valuable information that will enable you to make informed decisions when considering new faucet installations or replacements.

And if you are ready to start planning for a full bathroom remodel in the Atlanta area, be sure to check out our ultimate guide to bathroom remodeling.

Average Cost to Install a Faucet In Atlanta

When it comes to faucet installation, whether it be a new faucet in the kitchen or an existing faucet in the bathroom, the costs can vary considerably.

The average faucet installation cost in Atlanta ranges from $150 to $350, but this can change depending on several factors we'll explore later.

Average Faucet Cost

Now that we've covered the cost to install, it's time to address the elephant in the room: the cost of the faucet itself.

The price of a new faucet can depend on the faucet type and the faucet style, from simple single-handle faucets to elaborate pot fillers.

Whether you're shopping for kitchen faucets or a bathroom sink, you'll find prices in Atlanta averaging from $50 to $600.

Note that kitchen faucet prices tend to be a bit steeper than bathroom ones, largely due to the increased functionality.

High-Range Faucet Cost

High-end options like pull-down faucets, wall-mounted faucets, or deck-mounted faucets can cost between $300 and $1500.

Faucets with additional features like a pull-out faucet or a detachable spray hose, or those made of high-quality materials like bronzed gold, are likely to be on the higher side of the cost spectrum.

Low-Range Faucet Cost

On the other hand, more straightforward faucet designs such as the classic gooseneck faucet, or basic kitchen sink faucets, may only set you back around $50-$150.

Average Faucet Installation Cost by Location

The location of the new faucet can also significantly impact the installation costs.

For instance, kitchen faucet installation is typically more expensive than a bathroom sink or outdoor faucet, mainly due to the complexity of the installation and whether there's a garbage disposal involved.

However, this can vary depending on your existing plumbing and the overall state of your plumbing system.

Factors That Affect the Bathroom Faucet Cost of Installation or Replacement

Several factors influence how much you should expect to spend on a faucet installation or replacement.

Faucet Style

The faucet style you choose will significantly impact your budget.

Here are some popular styles and their average costs:

Traditional Knob Style

A classic choice, usually found in more traditional homes, with prices around $50-$150.

Lever Style

A modern alternative to knobs, with prices averaging $70-$200.

Cross Style

A vintage-style choice, with average prices around $75-$250.

Push-Button

These are common in commercial settings, and prices range from $100-$300.

Joystick Style

A sleek, modern choice, with prices around $80-$250.

Motion Sensor or Touchless

A convenient, high-tech option, which typically costs between $200 and $600.

However, some luxury versions of this style of faucet can cost as high as $1,200.

Single Handle

Single-handle faucets are relatively simple to install and run about $50-$200.

Centerset (3 Hole)

Centerset faucets typically have sink holes that are no more than 4 inches apart and range from $75-$250.

Widespread

This style of faucet fits a 3-hole configuration on sinks where the holes are more spread out (typically 8-6 inches) than a standard centerset faucet (where the holes are usually no more than 4 inches apart).

These faucets offer a high-end look and can cost anywhere from $150-$600.

Wall-Mount

Wall-mounted faucets offer a distinctive look but require more installation work, costing between $200 and $800.

Features

Some faucets come with added features like pull-down or pull-out sprayers, hot and cold water indicators, or faucet extenders, which can increase the price.

The impact that a particular feature has the final faucet price varies widely from manufacturer to manufacturer, so the best strategy is to research a particular feature that you want and see what price ranges are available. 

Material And Finishes

Materials and finishes can vary, with options like brushed nickel, chrome, and bronze.

Generally speaking, chrome and brushed nickel are the more common finishes, and therefore don't impact the final price as much.

Rarer luxury finishes, such as bronzed gold or champagne bronze, will add $50 to $100 to your final cost, on average.

Expect to spend between $50 and $800 in total, depending on your chosen finish.

Permits

In some cases, you might need a permit for your faucet installation, which could add to the total cost.

This usually only applies if you need to drastically reconfigure your plumbing for a faucet.

For example, if you are switching from a standard faucet installation to a wall-mounted configuration.

Additional Costs

Extra costs can arise if you're replacing an old faucet and the existing faucet removal is complex, or if supply lines need to be replaced.

How to Know When You Need a Bathroom Faucet Replacement

Here are some telltale signs that it might be time to replace your bathroom faucet:

Outdated Appearance, Visible Rust, Or Design Doesn’t Match Bathroom Decor

If your faucet looks old, worn out, or rusted, it might be time for an upgrade. 

Similarly, if the faucet design doesn't match the rest of your bathroom decor, it may be time for an upgrade.

If you have a beautiful ultra compact quartz bathroom countertop, why not highlight it with an equally stunning new faucet?

Leaking Or Dripping

Frequent leaks can be a sign that it's time for a new faucet.

Weak Water Flow

If water doesn't flow smoothly and efficiently as it should, you might need a new faucet.

DIY Bathroom Faucet Installation vs. Hiring a Professional

While DIY faucet installation can save on labor costs, hiring a professional ensures the job is done right.

Professionals can handle issues like existing plumbing problems, ensuring proper installation and longevity.

Cost to Replace a Faucet Yourself

Choosing the DIY route can save you a chunk of labor costs. 

However, keep in mind that you'll need the right tools to get the job done.

If you don’t already have these, they'll add to the cost of your project.

Here's a list of essential tools and their average costs:

• Adjustable wrench: This tool is a must for loosening and tightening nuts and bolts. You'll probably need two, one for holding and one for turning. Average cost: $10 - $20 each.

• Basin wrench: This specialty plumbing tool is designed to reach up behind your sink to remove the nuts holding your faucet in place. Average cost: $15 - $40.

• Screwdriver set: You might need both flat-head and Phillips-head screwdrivers, depending on your faucet's design. Average cost: $10 - $30 for a set.

• Plumber's putty or silicone caulk: You'll use this to seal around the faucet base. Average cost: $5 - $10.

• Plumber's tape: This helps ensure a water-tight seal on your supply lines. Average cost: $3 - $5.

• Bucket and rags: For clean-up and to catch any water while you're working. You've probably got these around the house, but if not, you can get a bucket for around $3 - $10 and rags for $5 - $15.

• Safety glasses: It's always a good idea to protect your eyes when doing DIY projects. Average cost: $5 - $15.

The total cost of these tools can range from $56 to $145, and these can be reused for future projects.

Adding the cost of the new faucet, which we previously determined could range from $50 to $600, your total DIY cost will range from $106 to $745.

However, keep in mind that these prices can vary, and unexpected complications can increase the cost.

Always do your research and be prepared!

Tips to Save Money When Installing a New Bathroom Faucet

• Consider the faucet style, type, and material before purchase to avoid unnecessary expenses.

• Research faucet prices to ensure you're getting a good deal.

• Choose a style that suits your bathroom's current layout to minimize changes to plumbing.

Frequently Asked Questions (FAQs)

How long does it take to replace a bathroom faucet?

It can take anywhere from 1 to 3 hours, depending on the complexity of the new faucet and the condition of the existing plumbing.

What should I consider when buying a new faucet?

Consider the style, material, installation type, and additional features like a detachable spray hose or touchless technology.

Is it worth it to replace an old bathroom faucet?

Absolutely! A new faucet can add value to your home, save water, and reduce maintenance costs.

How long should I expect my new bathroom faucet to last?

A quality faucet can last anywhere from 10 to 15 years, depending on use and maintenance.

Contact Ranney Blair Remodeling For All Your Luxury Bathroom Remodeling Needs

Now that you're equipped with comprehensive knowledge about faucet installation and replacement costs in Atlanta, it's time to bring your bathroom to the next level!

With Ranney Blair Remodeling, you can expect high-quality bathroom remodeling services that cater to your specific needs.

Whether you're planning a complete overhaul of your bathroom or kitchen, we've got you covered.

To get started on your dream bathroom remodeling project, fill out our contact form today or give us a call!